Robinson R66 Helicopter Special Tools
This is the complete selection of special tools for your Robinson R66 Helicopter. Rotorcorp offers several complete sets of tools at a discount for easy ordering, or individual tools can be ordered for any job.
Download the 2020 R66 Special Tools List and Prices
Download the 2020 Complete Set of Robinson Special Tools (R22, R44, R66)
Need R66 Tool Pictures? Check the Illustrated Parts Catalog [Here]
– | RC-MT-R66A | Complete R66 Special Tools Set (Items 1-28) and 2020 Probalancer | $24,383.00 |
– | RC-MT-R66B | Complete R66 Special Tools Set (Items 1-26, 28) w/out Probalancer | $10,383.00 |
– | KI-6601 | R66 Minimum Spares Kit (Supercedes KI-198) | $14,700.00 |
1 | MT054-1 | Main Rotor Gearbox Drain Assembly – Quick Disconnect | $197.00 |
2 | MT122-6 | Micrometer Assembly – Main Rotor Hub, Bolt Stretch | $1,490.00 |
3 | MT146-4 | Blocks – Swashplate Rigging (set of 2) | $171.00 |
4 | MT147-1 | Bleed Tool – Main Rotor Blade Spindle | $370.00 |
5 | MT179-4 | Balancing Bar – Tail Rotor Assembly Static Balance | $328.00 |
6 | MT260-6 | Tail Rotor Drive Shaft Runout Attachments Kit | $230.00 |
7 | MT329-6 | Plug – Main Rotor Hub Bearing Installation | $221.00 |
8 | MT352-1 | Main Rotor Blade Trim Tab Gage | $448.00 |
9 | MT354-4 | Teeter Moment Tool (MT354-7) | $402.00 |
10 | MT357-2 | 0.375-inch diameter Reamer | $94.00 |
11 | MT357-3 | 0.156-inch diameter Steel Drill | $5.00 |
12 | MT357-4 | Hex Driver (Snap-On Part No. FABL8) | $44.50 |
13 | MT357-5 | Torque Adapter (Snap-On Part No. FRDH101) | $52.00 |
14 | MT359-1 | Spring Scale (0-30 lb) | $279.00 |
15 | MT384-1 | Hydraulic Test Pump (U.S / Canada / Mexico – 110-volt), OR | $2,450.00 |
16 | MT384-2 | Hydraulic Test Pump (Outside North America – 220-volt) | |
17 | MT525-7 | Main Rotor Blade Rigging Fixture | $198.00 |
18 | MT525-9 | Tail Rotor Blade Rigging | $185.00 |
19 | MT526-8 | Bender Assembly – Trim Tab, Main Rotor Blade | $512.00 |
20 | MT527-1 | Helicopter Lifting Fixture | $705.00 |
21 | MT548-8 | Fitting (Engine Hoist Adapter) | $185.00 |
22 | MT549-1 | Spacer – Spindle Boot (set of 2) | $98.00 |
23 | MT549-2 | Plate – Spindle Boot | $54.50 |
24 | MT556-11 | Kit Tools – Tail Rotor Hub Bearing Replacement (MT556-17) | $660.00 |
25 | MT643-1 | Support Weldment – Main Rotor Hub Bearing Installation | $517.00 |
26 | MT759-1 | Blocks – Cyclic Rigging | $487.00 |
27 | 2020HR | ACES Probalancer Analyzer (or equivalent dynamic balancer) | $14,000 |
28 | AN970-4 | Washer – Tap Test Tool | $0.45 |